润滑科技信息平台

Effect of aspect ratios of aramid fiber on mechanical and tribological behaviors of friction materials

出版日期: 2015-12

DOI: 10.1016/j.triboint.2015.05.024

作者: Cai, Peng; Li, Zhenlian; Wang, Tingmei; Wang, Qihua;

In this study, the effect of aspect ratios of aramid fiber on the mechanical and tribological characteristics of friction materials was studied. It was found that with increased aspect ratio of fiber, flexural strength of the composites generally increased and compressive strength decreased, while mu and wear rate of composites increased first and then decreased at selected load and speed. With the addition of fibers, mu and wear of composites increased. 10 vol% of aramid pulp was an optimal volume fraction for improved friction and wear behaviors. The wear mechanisms were discussed under the support of worn surface morphologies. (C) 2015 Elsevier Ltd. All rights reserved.

In-situ observation of transfer film formation and evolution for the fabric composite lubricated spherical plain bearing at cryogenic and wide temperature range

Pub Date: 2015-12 DOI: 10.1016/j.triboint.2015.05.024

[Cui, Wenyan, Xu, Mingkun, Tao, Liming, Wang, Tingmei, Yu, Chengguo, Liang, Bo, Ma, Tianbao]

Effect of core-shell structured SiO2@MoS2 on the tribological properties of epoxy resin/carboxyl terminated butadiene acrylonitrile composites

Pub Date: 2015-12 DOI: 10.1016/j.triboint.2015.05.024

[He, Wenfang, Zhang, Zhancheng, Wang, Rongmin, Zhang, Yaoming, Wang, Qihua, Wang, Tingmei, Pei, Xianqiang]

Thermal compression and accumulation effect on lubrication regime transition mechanism of water seal

Pub Date: 2015-12 DOI: 10.1016/j.triboint.2015.05.024

[Yin, Tuyuan, Wei, Dasheng, Wang, Tingmei, Xie, Zhongliang]